.. _ws_and_depth_for_hazus:

14. Water Surface and Depth for HAZUS
==============================================================

This tool is used to assign water surface and depth to the grid layer.

.. image:: ../../img/gridtools/Assign-Water-Elevations-from-Points/assignwater001.png

Load MAXELEV
------------

1. Click on Layer>\ Add Layers >\ Add Delimited Text Layer or click on the Open Data Source Manager button
   and navigate to the Delimited Text tab.

.. image:: ../../img/Buttons/addlayer.png

2. Add the MAXELEV.OUT, following the figure below.

.. image:: ../../img/gridtools/Assign-Water-Elevations-from-Points/assignwater002.png

3. Check if the data was correctly processed.

.. image:: ../../img/gridtools/Assign-Water-Elevations-from-Points/assignwater003.png

.. note:: For a better visualization of the FLO-2D outputs, use MapCrafter. Check the FLO-2D-MapCrafter Wiki_.

          .. _Wiki:  https://github.com/FLO-2DSoftware/FLO-2DMapCrafter/wiki

Assign Water Elevations/Flow Depths to Grid from Points Layer
-------------------------------------------------------------

4. Click on the Assign Water Elevations/Flow Depths to Grid from Points Layer button.

.. image:: ../../img/gridtools/Assign-Water-Elevations-from-Points/assignwater001.png

5. Edit the dialog box as shown below and click the Assign to selected grid field button.

.. image:: ../../img/gridtools/Assign-Water-Elevations-from-Points/assignwater004.png

6. Wait the process to finish and click OK.

.. image:: ../../img/gridtools/Assign-Water-Elevations-from-Points/assignwater005.png

7. Check the Grid Attribute Table to verify if the data was correctly assigned.

.. image:: ../../img/gridtools/Assign-Water-Elevations-from-Points/assignwater006.png

.. note:: The same process can be performed for the DEPTH.OUT file.